EPOXY RESIN WORKTOPS AND SINKS
Epoxy resin is the modern laboratory worktop material that offers a superb combination of features and benefits. It is durable, extremely chemical and stain resistant, mechanically strong, easily cleaned and decontaminated and exhibits good fire resistance, fire propagation and low smoke properties. Components are molded in a formulated epoxy resin material which has the same chemical properties throughout its entire thickness.
Worktops
Worktops are supplied at a nominal thickness of 15mm – 19mm – 25mm to provide good mechanical strength whilst remaining manageable when handling during site fitment. Work-tops are supplied in sections up to 3 meters long to minimize the need for joints. Where joints are required, worktops are supplied with a tongue-and groove system (including all jointing materials) to ensure tight, level site joints.
All joints are made with a color matched chemically resistant epoxy resin grout/adhesive. Most worktops are fabricated to a customer’s own specification and are supplied in an easy to assemble form with the minimum of joints.
All assemblies are laid out in our works to ensure dimensional accuracy, matching of components, flatness of joints and overall appearance.
This way you can be assured that all items will fit together accurately on site.
HERAIS Epoxy Resin worktops are cast in a nominal thickness of 19 mm and in lengths up to 3000 mm and widths up to 1500 mm.
Worktops can be cut with a square edge, have a radius edge machined on to them, or can have an edging profile fitted.
Worktops are cast in solid homogeneous form and so cannot delaminate and will exhibit the same excellent chemical resistance throughout their entire thickness. Worktops are mechanically strong and as such do not require any sort of backing material.
We also offer sheets as per client needs. Sheet dimensions: 3650mm X 1503mm X 15mm/19mm/25mm.
Epoxy Resin Sinks
HERAIS offer a range of sink-tops in various sizes and configurations. Fully molded sink-tops have integral sinks and drainers providing seamless performance. Sink-tops can also be fabricated to suit a non-standard size or configuration.
HERAIS cast a wide range of epoxy resin sinks which can be fitted to a worktop in a number of different ways. All sinks have an integral flange to allow easy fitment whether fitted from above or below a worktop. Sinks are cast in the same epoxy resin material that is used to cast our worktops and will have the same chemical resistance. They are available in all of our Black, Grey & White colors.
Click to download HERAIS Epoxy Resin Work-Tops and Sinks Catalogue.